44 Magnum Ammunition?

i just recently bought a taurus tracker 44 mag and i am in a minute looking for the best ammunition to run through it. i am looking for a bullet that can stop a black bear in his tracks. If anyone have advice on a specific brand name bullet as resourcefully as the best grain size bullet, please let me know. im still really unfamilier with whats what THANKS
WARNING! Do NOT use Buffalo Bore in your Taurus! It will explode in your foot! The 2 best choices for your Taurus are both Cor-Bon.

Corbon Hunter Ammunition , 44 Remington Mag, Bonded Core Hollow Point, 260 GR, 1450 fps.

Probably the best choice would be:
Corbon Hunter Ammunition , 44 Remington Mag, Flat Point Penetrator, 305 GR, 1250 fps.
I'd say a hard sort gas-check bullet of 300 grains' weight would be right, but you may have trouble handling the nouns. I personally hate the SOB's, and I own to work hard at it to build my tolerance for them if I'm planning to hunt with them. You may find it better to stick to something close to 265 grains. Keep in mind that it's a 44, so you want permeation and you want the bullet to hold together (not fall apart, or even rivet). The bullet makers come across to be trying to sell you on expansion, which isn't really needed with a large-bore revolver. Also, you aren't realistically going to shoot satisfactory of that load to worry much something like leading. You can ignore the jacket, the hollow points, and all that fancy crap (which has a slight movement to divert your shot after impact) and get to the basics of hunting next to a large-bore revolver.
I agree with the others do NOT use Buffalo bore 44 mag 340 gr +P+ contained by that gun.

I know you just asked what ammo to use. But you might want to read my answer if you want to survive such a bear attack. I could introduce you to relations I know who were badly maul by a bear or show you the graves of those who didn’t survive it. I know bears and live within a high bear population nouns in Alaska.

The only track to stop a black bear in its tracks is bullet placement. I watch a man stop a black bear attacking his dog with one shot from a 44 special, hit it right at the remnant of the neck damaging its vertebrae and nerves. It dropped on the spot but be still alive.
So being accurate it number one and getting that accurate requires lots of practice. Don’t think you can a moment ago buy ammo and your good to go. That’s a doomed to failure idea. When a bear charges its not straightforward to hit the vitals, its bounding up and down and coming at you at 30+ mph.

Every year I use a old tire with a round piece of plywood bolted where on earth the rim would be with a target in the middle for a moving target. I own my wife roll it off a high dune so it rolls and bounces past me and shoot for the center with my 44 mag. This keep me tuned for a bear. If you do this and cant hit it in the center one time out of 6 your going to be accept poop. And usually you don’t get 6 shots in a accept attack, more like one or two.

Black bears are not as tough as grizzlies or brown bear. Any high velocity jacketed soft point or hard strike flat nosed lead bullet will work. And in that are many to choose from that are made from well prearranged ammo manufactures.
Read this article, it explains why jacketed soft points are better for black bears;
Unlike a big grizzly you want the bullet to mushroom some to release its vivacity instead of just passing through. The root hard cast solids are used for grizzlies is because they are so tough it wont pass by through but will penetrate deeply.
Study this drawing of shot placement;

Mr DeWitt is rather knowledgeable about firearms but I hold to differ with him about jacketed bullets on black bear. You see jacketed bullets have a much softer lead than the not easy cast lead bullets. The jacket help control expansion and indeed at lower velocities even hollow point jacketed bullets may not expand in flesh next to short barreled 44 mag. The reason for a jacketed bullet is to hold it together until it hits a solid object close to bone. If you look at the diagram I linked to, you see the shoulder is in the course of the vitals at many angles. So what happens is the bullet hits the shoulder blade and as it penetrates it, it expands into the vitals.
Remember strength is lost if the bullet passes through the bear. You want that sparkle released into the bears vitals.
This is important because if you’re rotten the mark some, a solid non expanding bullet may not stop the bear. But that expanded soft tip will give a much larger wound channel. This can make the difference between stopping the undergo or the bear mauling you and then dying after that.
The massive body of grizzly may stop a soft point or hollow point before it reaches the vitals. Black bear weigh from 250 to 550 lbs with some rare ones over 600. Grizzlies and brown bear can be MUCH larger. Some brown bears weigh 1200 lbs. You just can compare a touch black bear to a 800 lb grizzly; muscle, hide and bone mass are much different.

Butch C give you a great simple answer. You don’t have to use a 300+ gr bullet any round from 240gr up will work.

I dont care more or less points or best answer I just want people to stay alive.
Good luck and be safe and sound.
There's no caliber that's going to stop anything in its tracks only just by being itself. Shot placement blah blah blah. A good .223 placed correctly will drop it straight away, as will a decent .38spcl. A badly placed .50 is going to do zilch but piss him off.

Having said that pretty much anything deer capable is black accept capable. I would stay away from hollow points as penetration may be undersupplied. 240gr and above at close range will be fine. For bullet choice you want to stick with a heavily constructed bullet, nearby are quite a few to choose from. Personally I like speer gold-dots surrounded by soft point for heavy game. They hold together and get into well. They've performed ably out of my super blackhawk.
I am going to be completely honest: I own a Ruger Redhawk in .44 magnum, and I use the Buffalo Bore "Redhawk Only" loads if I want protection against bears (the "little" black bear up here get over 500lbs. easy). These loads are not only outrageously expensive, they're loaded to specs that would probably turn your Taurus into a bomb.

What I would suggest, is getting any hardcast 300+ pellet bullet, traveling as fast as your Taurus can take. I would seriously look into Buffalo Bore or Garrett, who produce hardcast hot loads.

EDIT: My mistake, Butch pointed it out: NO BUFFALO BORE IN A TAURUS. I thought they made lighter stuff but I be wrong. My bad. Source(s): Avid shooter/Experienced Machinist/I still prefer a shotgun or rifle for anti-bear work.

Related Questions:
  • What is the best GPS navigator for around $150?
  • What is the best construct of guitar? not too expensive?
  • Uniden,Panasonic or Ge phone??
  • What is the best brand of airsoft guns??
  • What's the best brand of jeans for a size 00 or 0 young girl?
  • Which is a accurate striaghtner brand?